How To Fix A Scorch Torch Lighter? Learn in a minute

A Scorch Torch lighter is a reliable tool for smooth, powerful flames until it suddenly stops working. Whether your torch won’t ignite, struggles after a refill, or just isn’t performing like it used to, we’ll help you diagnose and fix the issue without frustration.

This guide covers every common Scorch Torch problem, step-by-step solutions, and even how to replace the flint. Plus, we’ll share tips to keep your lighter running like new.

Common Scorch Torch Problems & How to Identify Them

Before fixing your lighter, figure out what’s wrong. Here are the most frequent issues:

1. Scorch Torch Not Igniting (No Spark or Flame)

Signs:

🔹You hear a clicking sound, but no flame appears.

🔹No spark at all when pressing the ignition.

Likely Causes:

🔹Flint is worn out or misaligned.

🔹Clogged nozzle or gas flow issue.

🔹Empty fuel tank (even if recently refilled).

Fixing a Scorch Torch That Won’t Ignite:

1. Check the Fuel Level

Even if you recently refilled it, try adding high-quality butane (cheap fuel can cause clogs).

2. Purge Air from the Tank

🔹Turn the flame dial to minimum.

🔹Use a small screwdriver to press the refill valve until all air hisses out.

🔹Refill slowly with butane.

3. Clean the Ignition & Nozzle

🔹Use a compressed air duster to clear debris from the spark area.

🔹For clogged nozzles, a thin needle can gently unblock the gas flow.

4. Replace the Flint (If No Spark)

[See detailed flint replacement guide below.]

2. Scorch Torch Not Working After Refill

Signs:

🔹Flame is weak or dies immediately.

🔹Hissing sound but no sustained fire.

Likely Causes:

🔹Air is trapped in the fuel chamber.

🔹Overfilled or underfilled butane.

🔹Poor-quality butane is causing clogs.

Fixing a Scorch Torch After Refill:

🔹Purge the Lighter First (as above).

🔹Use Premium Butane – Low-quality fuel leaves residue, clogging the system.

🔹Adjust Flame Height – Turn the dial gradually after refilling to stabilize pressure.

3. Flame Too Weak or Inconsistent

Signs:

🔹Flame flickers or barely stays lit.

🔹Adjusting the flame dial does nothing.

Likely Causes:

🔹Low fuel pressure.

🔹Dirty burner nozzle.

🔹Damaged internal components.

Repairing a Weak or Flickering Flame:

🔹Increase Fuel Flow – Turn the flame dial slightly higher.

🔹Deep Clean the Burner – Soak the nozzle in isopropyl alcohol for 10 mins, then blow out excess.

🔹Check for Damage – If cleaning doesn’t help, the internal jet may need professional repair.

4. Torch Lighter Leaking Butane

Signs:

🔹Smell of gas when not in use.

🔹Fuel drains quickly even when idle.

Likely Causes:

🔹Faulty O-ring or valve seal.

🔹Crack in the fuel tank.

Stopping Butane Leaks:

🔹Tighten the Valve – Use pliers (gently!) to secure the fuel inlet.

🔹Inspect the O-Ring – If cracked or worn, replace it (some models allow this).

🔹Avoid Overfilling – Fill in short bursts, waiting 5 seconds between presses.

How to Replace the Flint in a Scorch Torch Lighter

If your lighter clicks but won’t spark, the flint is likely worn out. Here’s how to replace it:

Remove the Flint Spring

🔹Unscrew the ignition wheel cover (if applicable).

🔹Carefully take out the spring and old flint.

Insert a New Flint

🔹Drop in a standard torch lighter flint.

🔹Reattach the spring, ensuring firm contact.

Test the Spark

🔹Before refueling, check if the wheel produces sparks.

(Note: Some Scorch Torch models have permanent flints. If yours won’t spark after cleaning, it may need professional service.)

Keep Your Scorch Torch Running Smoothly

To avoid future issues:
✔ Use high-quality butane (impure fuel causes most problems).
✔ Purge before refilling (prevents airlocks).
✔ Clean the nozzle monthly (prevents clogs).
✔ Store upright (reduces leaks).

Need a Reliable Replacement? Try SmokeMEGA’s Premium Scorch Torch Lighters

If your Scorch Torch is beyond repair, or you just want an upgrade, our SmokeMEGA Scorch Torch Lighters are built for longevity and performance.

🔹 Jet-Engine Flame – Consistent, windproof fire.
🔹 Ergonomic Design – Comfortable for extended use.
🔹 Leak-Proof Fuel System – No wasted butane.

Check out our collection for a dependable torch lighter that won’t let you down.

Final Thoughts

Most Scorch Torch issues are easy to fix with the right steps. Whether it’s a clog, a flint problem, or a refill mistake, this guide should get your lighter back in action.

Still stuck? Contact us, and we’ll help troubleshoot! 🔥

(Note: Always work in a well-ventilated area when handling butane.)

Also, see our other step-by-step guide blogs about Scorch Torch Lighters:
1. How to Replace the Flint of your Lighter
2. Refill Your Butane Torch Lighter

Frequently Asked Questions

Thinking about upgrading your lighter? Explore our premium Scorch Torch Lighters today: